S H O T O N

Loading

Choosing Right: 7 Key Industrial Hose Factors

industrial hose's application

The Hose Selection Process

Selecting the right industrial hose is a critical process that demands precision to meet specific operational needs. The key considerations in this selection process revolve around the conveyed medium, ensuring compatibility, safety, and optimal performance.

In summary, a meticulous industrial hose selection process involves identifying the medium, prioritizing chemical compatibility, considering temperature and pressure requirements, ensuring compliance with standards, and accounting for size, flexibility, and wear resistance. This comprehensive approach guarantees a hose that not only meets but exceeds operational needs, ensuring efficiency, safety, and durability

The 7 Key Factors for Industrial Hose Selection

A widely used method to select the correct hose can be summed up in the acronym STAMPED: size, temperature, application, medium, pressure, ends and delivery. Note that these criteria do not stand alone; the combination of these internal and external factors is decisive when choosing the correct type of hose for your specific needs.

Size

Sizing is the basic essential factor in industrial hose selection. And it specifications for industrial hoses include the inner and outer diameters, and length.

hose diameter measuring

Inner diameter

The inner diameter of a hose refers to the measurement of the opening inside the hose through which fluids, gases, or other substances flow. It is a crucial parameter in hose selection, as it directly influences the flow rate and efficiency of the system. The inner diameter is typically expressed in inches or millimeters.

When selecting a hose, it’s essential to consider the inner diameter alongside other factors like material compatibility, pressure ratings, and temperature resistance. The optimal inner diameter depends on the specific requirements of the application, and choosing the right size contributes to the overall effectiveness and reliability of the system.

Outer diameter

The outer diameter of a hose refers to the measurement of the hose’s exterior, encompassing the full width from one side to the other. It is an important parameter in hose selection and installation, influencing factors such as compatibility with fittings, ease of routing, and the hose’s resistance to external factors. The outer diameter is typically expressed in inches or millimeters.

It’s essential to balance considerations of inner and outer diameter, along with other factors like material compatibility, pressure ratings, and temperature resistance. The goal is to choose a hose that not only meets the functional requirements of the application but also integrates smoothly into the overall system.

Length

The length of a hose is a crucial factor in its application and performance. Determining the appropriate hose length involves considering the specific requirements of the system or task at hand. By carefully considering these factors, you can select the optimal hose length that meets the requirements of your application while ensuring efficiency, safety, and cost-effectiveness.

Temperature

Evaluate the temperature conditions of your industrial environment. Select a hose that can withstand the extremes of temperature—both high and low—encountered in your application. This prevents issues such as cracking or softening due to temperature variations.

Fluid temperature

The fluid temperature of an industrial hose is a critical consideration in hose selection, as it directly affects the performance, safety, and longevity of the hose in a specific application. Different hoses are designed to handle varying temperature ranges, and selecting the right hose for your intended fluid temperature is essential.

By carefully considering the fluid temperature and selecting a hose that aligns with the temperature conditions of your application, you ensure the reliability and safety of the hose in diverse industrial settings. Always refer to the manufacturer’s specifications and guidelines to make informed decisions based on your specific temperature-related requirements.

Ambient temperature

The ambient temperature of an industrial hose refers to the temperature of the surrounding environment in which the hose is operating. Ambient temperature is a critical factor in the performance, durability, and safety of industrial hoses. By taking these factors into account, you can select industrial hoses that are well-suited for the ambient temperature conditions of your specific application, ensuring reliable and safe operation. Always refer to the manufacturer’s recommendations and guidelines to make informed decisions based on your ambient temperature-related requirements.

Application

Before diving into the sea of industrial hoses, identify the purpose of the hose in your application. Is it for transporting water, oil, chemicals, or gases? Understanding the intended use is the first step in narrowing down your options.

Medium

The medium of an industrial hose refers to the substance or material that the hose is designed to transport or convey. Different industrial hoses are engineered to handle specific types of media, whether they are liquids, gases, powders, or other materials. The compatibility between the hose material and the conveyed medium is crucial for ensuring the hose’s performance, safety, and longevity.

Understanding the medium that the industrial hose will convey and selecting a hose with the appropriate material and specifications for that medium is fundamental to achieving optimal performance and safety in industrial applications. Always refer to manufacturer recommendations and guidelines to ensure proper hose selection based on the conveyed medium.

Pressure

Consider the pressure requirements of your application. Determine both the maximum and minimum operating pressures the hose will face. It’s essential to choose a hose with a pressure rating that comfortably exceeds the maximum operating pressure to account for fluctuations and ensure safety.

Ends

Choose the appropriate end connections and fittings for your industrial hose. Compatibility with your equipment is crucial, and ensuring a secure connection minimizes the risk of leaks or failures. Consider factors like threading, size, and material of the fittings.

Delivery

A new system will require a new hose and an expert partner will be able to provide you with samples to test in-house. And, to ensure you determine the best solution before any final decisions are made, they will also be able to tell you what’s possible and what’s not. This will also apply to machines already in operation where replacement hoses are difficult to make.

Reference:

The 7 Key Factors to Select the Right Industrial Hose Published on 01 July 2022

Share On
As a manufacturer and supplier with more than 20 years of experience, we are able to provide comprehensive and professional hydraulic product solutions. If you need support, please click the following button.

Read More Articles

Subscribe to Get Newest Update

Subscribe to get our latest insights, knowledge and experience. We will only send email when necessary. You may unsubscribe at any time.

All Your Request Will Be Replied Within 2 Hours

We'll send you the full details to your email

Rest assured, the protection of your email information is a top priority for us. We operate in full compliance with GDPR and CCPA, maintaining strict data security and privacy standards.